2lb closed-cell spray foam insulation is a type of insulation that is sprayed onto surfaces using a special equipment. It is a popular choice for insulating attics, walls, and crawl spaces.

​

The "2lb" refers to the weight of the foam per cubic foot.

The closed-cell structure of the foam means that each foam cell is completely enclosed and not connected to other cells. This gives the foam a higher density and R-value (thermal resistance) compared to other types of insulation, such as open-cell foam.

​

Closed-cell spray foam insulation is also known for its excellent air sealing properties, which can help to reduce drafts and improve energy efficiency. It also has the ability to fill small cracks and gaps, making it a great option for older homes or buildings that may have less than optimal construction.

​

It's important to note that the application of closed-cell spray foam insulation requires a professional trained and certified in the process, it also requires specific equipment and it can be more expensive than traditional insulation materials.

Fiberglass blown-in insulation is a type of insulation that is made from glass fibers and is installed by blowing it into walls, attics, and other areas of a building using specialized equipment.

This type of insulation is typically installed by professional insulation contractors.

​

One of the main advantages of fiberglass blown-in insulation is its ability to fill small crevices and tight spaces that may be difficult to insulate with other types of materials. It is also relatively affordable and easy to install.

​

The R-value (measure of thermal resistance) of fiberglass blown-in insulation depends on the density of the insulation and the thickness of the insulation layer. It is generally considered to be similar to fiberglass batts insulation, which is commonly used in attics and walls.

​

Fiberglass blown-in insulation is also relatively fire-resistant, but care should be taken to avoid inhaling the fibers during installation, as they can cause irritation to the eyes and lungs.

​

It is important to note that the effectiveness of fiberglass blown-in insulation depends on the proper installation, so it's important to hire a professional insulation contractor with experience in handling and installing this type of insulation.

0.5lb open-cell spray foam insulation is a type of insulation that is sprayed onto surfaces using a special equipment.

​

The "0.5lb" refers to the weight of the foam per cubic foot, making it less dense and less R-value per inch than closed-cell spray foam insulation.

​

The open-cell structure of the foam means that the cells are not completely enclosed and are connected to each other, this gives the foam a lower density compared to closed-cell spray foam.

​

Open-cell spray foam insulation is often used in walls, attics, and other areas where a lower R-value is sufficient. It is also less expensive than closed-cell spray foam insulation, and it can expand more, filling the small cracks and crevices that can allow air and moisture to infiltrate a building. 

​

This Insulation is also a great option to sound-proof interior walls and floors.

Cellulose blown-in insulation is a type of insulation that is made from recycled paper products, such as newsprint, and is installed by blowing it into walls, attics, and other areas of a building using specialized equipment.

 

This type of insulation is typically installed by professional insulation contractors.

​

One of the main advantages of cellulose blown-in insulation is its ability to fill small crevices and tight spaces that may be difficult to insulate with other types of materials. It is also relatively affordable and easy to install.

 

Cellulose insulation is also considered to be more eco-friendly than some other insulation materials.

The R-value (measure of thermal resistance) of cellulose blown-in insulation depends on the density of the insulation and the thickness of the insulation layer. It generally has a higher R-value than fiberglass insulation, which can result in greater energy savings.

 

Cellulose blown-in insulation is also relatively fire-resistant, as it is treated with fire retardants. It's also considered to be less irritating to the eyes and lungs than fiberglass blown-in insulation

Batt insulation, also known as blanket insulation, is a type of insulation that is made from a variety of materials such as fiberglass, mineral wool, or cotton.

 

It is available in pre-cut widths and lengths and is commonly used to insulate walls, attics, floors, and other areas of a building.

​

One of the main advantages of batt insulation is that it is relatively easy to install, especially for DIY projects. It also has a relatively low cost compared to other insulation types.

​

The R-value (measure of thermal resistance) of batt insulation depends on the material and the thickness of the insulation. Fiberglass batt insulation typically has an R-value of around R-3.2 to R-3.8 per inch and mineral wool batt insulation has an R-value of around R-3.0 to R-3.5 per inch.

​

Batt insulation is also relatively fire-resistant, but care should be taken to avoid inhaling the fibers during installation, as they can cause irritation to the eyes and lungs.

​

It's important to note that the effectiveness of batt insulation depends on the proper installation, so it's important to make sure that the insulation is cut and fit properly, without any gaps or compressions. 

Attic blown-in insulation removal is the process of removing existing blown-in insulation from an attic.

 

Blown-in insulation, also known as loose-fill insulation, is made of small particles that are blown into an attic using a machine. The process of removing blown-in insulation can be challenging because the small particles can easily scatter and become difficult to contain.

​

Insulation removal professionals typically use specialized equipment to vacuum out the insulation, which helps to contain the particles and make the process more efficient.

 

Once the insulation has been removed, the attic should be thoroughly cleaned and inspected for any damage or potential hazards. After that, the attic can be reinsulated with new insulation material.

​

It is important to note that removing insulation without professional help could cause insulation to spread throughout the house and create respiratory issues. Also, it is important to check for any other hazards like mold and asbestos before removing insulation.